The Problem Solvers Sheldon Fender Nut was designed to replace the standard brake nut and allow convenient fender (Mudguard) mounting on steel and aluminum road frames and forks.
Product Uses:
Essentially, this is a long brake nut for road forks, as it allows the road brake nut to thread into it for brake mounting. But, it also has threading inside so that a fender (Mudguard) mounting bolt can be threaded into the back of the fork.
The PS Sheldon Fender Nut comes as a set of two sizes: 10mm for rear mounting and 13mm for front forks or 10mm Rear, 32mm Front
The fender nut will work with all steel and aluminum frames and forks; it also will work with some carbon forks, but check first. It will not work with forks requiring an extended brake nut or a narrow brake nut (such as Reynolds).
Technical details:
- PS Sheldon Fender Nut is a standard 6mm brake nut with longer internal threading and an extension on the back side for a 6mm mounting bolt
- Simply install your brake as you would normally then with a 6mm bolt, mount the fender (Mudguard) to the back side of the nut and to your fork or frame