Worklift'r 2.0 Hydraulic Assembly Stand

Worklift'r 2.0 Hydraulic Assembly Stand for bicycles/e-bikes/load bikes. E-bikes often cause problems when clamping in an assembly stand. High weight and unconventional frame shapes thwart clamping attempts with classic bicycle holding clamps. Cyclus Tools offers a professional solution with the Worklift'r 2.0. E-bikes, cargo bikes and even conventional bikes are quickly lifted into an ergonomic working position. The clever drive-on ramp allows bikes up to 30kg net weight to be lifted with little effort. The adapter system with different plug in adapters enables secure fixing of different axle mounts. The swivelling, height adjustable bottom bracket support is a safe and stable way to support the bike, if this cannot be used (e.g. with a mid engine model), the bicycle is supported using the rear wheel. The rear wheel sits on adjustable support rollers and remains fully mobile, as is necessary for example, when adjusting the gears and testing the drive system. The right working height is the basis for safe, ergonomic and effective work. The desired working height is set in seconds using the foot pedal. Tool holders on the side keep the required tools within easy reach. The Worklift'r can carry a maximum load of 100kg. The stand has two steered wheels allowing easy manoeuvring, while the parking brake ensures the stand stays put. Features: * Work surface can be extended on both sides, e.g. for cargo bikes. * Incl. plug-in adapter A / short 290011 and plug-in adapter B / short, slotted 290012 * Hydraulically height adjustable for ergonomic work * Flexible working on the bicycle due to 360 degree mounting * Adjustment of e-bike motors possible through rear roller on stand * Up to 100kg load capacity * Clamping of front wheels by means of adapters * Support for bottom bracket housing * Easy mounting due to practical loading ramp * Parking brake for stable stand * 2 articulated wheels for easy manoeuvring * Everything at hand: large storage area for tools & spare parts * Length incl. ramp: 2450mm * Height of tool tray: min. 290mm * Height of tool tray: max. 830mm * Length: 800mm * Width: 500 mm Further plug-in adapters available, per piece: * 290013 Plug-in adapter C / long * 290014 Plug-in adapter D / long, slotted * 290015 Plug-in adapter E * 290016 Plug-in adapter F / plug-in axle